Water damage is a common yet terrifying experience for phone users. Whether you drop your smartphone in the pool or bathroom, or when it encounters rainy weather, when it stops working, it also stops your heartbeat.

But the good news is there is also a solution. It is possible to revive your wet phone and avoid visiting a nearby phone repair shop if you take quick action and follow the appropriate steps. 

In simple steps, this blog will show you how to fix a water-damaged phone. Let’s get into it!

Rescue Your Phone From the Water

Although it’s insane to talk about it, it’s crucial to save your phone first. The longer you leave your phone submerged in water, the greater the chances it will fill with water and become less likely to survive.

Power Off Your Phone

The next tip by phone repair experts is to power off your phone. Check whether your phone is switched off after leaving the danger zone. If yes, turn it off immediately. In this way, you can halt the energy flow through your phone and cut off the power source by turning it off as soon as it becomes wet. This lessens the possibility of short circuits, stops more damage from happening, and increases the chances you can retrieve your phone. 

Disassemble Any Detachable Parts

Disassemble any removable parts of your phone, such as the battery, SIM card, and case, after turning it off. It helps you assess the damage level and prepare them for drying independently.

Whether you are an Android or iPhone user, you must know that taking out the battery needs a thorough disassembly, which is a task best left to experts in phone repair. So, do not attempt this step unless you have the proper knowledge. 

Blot Off Excess Water

After disassembling your phone, use a paper towel or dry cloth to remove any remaining moisture from the various parts of the mobile phone. You can dab rather than rub when doing this to prevent further harm to your cell phone. 

Soak Up the Moisture

Rag
A pile of the same type of cloth is represented

After drying off the phone’s exterior, you must absorb moisture seeping into the internal components. Even though it’s a common practice, placing your phone in a bag of raw rice isn’t the greatest way to remove water. 

As an alternative, think about putting the parts of your phone in a sealed container containing silica gel packets. You can find these tiny packets inside brand-new medicine bottles or shoe boxes. They are better than rice since they have been created to absorb moisture. 

So, it’s another move towards avoiding spending much money on various cell phone repair shops..

Wait It Out

Give your phone’s parts at least 24 to 48 hours to dry using the technique of your choice. Most moisture will evaporate during this period, lowering the possibility of damage and short circuits. Your phone’s precise drying time will vary depending on several factors, including the amount of water exposure and the drying method you choose.

The normal drying period for silica gel is twenty-four hours. If you use rice or a fan, you should increase the drying time to 48 hours. Your phone can dry faster if it is very briefly exposed to water. 

However, it may need longer drying if the phone is completely submerged or exposed to much water. Here, professional technicians suggest being patient during this time to prevent turning on the phone too soon, which can cause further harm.

Turn It On And Give It A Try 

You can try your phone to check whether it works after the initial drying time. You are good to go if your phone boots up normally, works on the touch screen, and sounds clear!

Or You Can Get Your Phone Repaired!

If, despite all of your outstanding efforts, your phone still feels dizzy, then you should get expert assistance from Flash Fix Mobile. From distorted screens and strange noises to failure to switch on, they have the expertise of skilled techs who can prevent the damage from worsening.

Conclusion

These are all the essential steps you must take when your phone encounters liquid. However, as we all know, prevention is better than cure; you should avoid any circumstances resulting in a water-damaged phone and frustrations. Yet, if it’s a matter of destiny, implement the steps mentioned above or contact the export.

FAQs

How do you get water out of your phone fast?

Put dry, uncooked rice into a bag that can be sealed. Instant rice could work more quickly here. Place the battery and any other moist parts of your phone inside the rice carefully. Avoid flipping the phone over or moving it around excessively.

How long does it take a wet phone to dry out?

Leave it for at least one night, but ideally, give it at least 48 hours. The longer, the better. However, sometimes phones cannot be resurrected no matter how long they are submerged in rice. In that case, you should quickly contact a nearby phone repair shop in Syracuse.

Can I dry my phone with a hair dryer?

Using a hair dryer on your wet phone is unacceptable. It can result in additional harm to your phone or maybe make it completely useless. You should get your phone professionally cleaned and examined for any signs of water damage.

Posted by Miley

Leave a reply

Your email address will not be published. Required fields are marked *